Laboratory Heating Equipment

Product Details:

AARSON offers a comprehensive range of high-performance Laminar Air Flow. Modular in construction, combining aesthetic appeal with functional utility and efficiency.

Construction:

• All Laminar Flow Clean Air Cabinets are basically constructed out of thick teak wood board, which is termite and insect proof, fire retardant and weather resistant. 
• All exterior surfaces are covered with white Laminates. 
• Interior surfaces are epoxy painted.
• Work table is made of mica top and side panels of thick transparent plexiglass

 

Air Flow and Filtration:

• Laminr Flow principle involves double filtration of air. 
• Atmospheric air is drawn through pre filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP
• Thus retaining all airborne particles of size 0.3 micron and larger. 
• Double filtered air blows in laminar flow through the work table at designed velocity of 90 ft. min ± 20%.

 

Lighting:

• Work area properly illuminated by diffused, glare free fluorescent light.
• Optional Accessories :
• Satin finish S.S. Table Top (in lieu of Sunmica Top)
• Transparent front door 
• Static pressure inclined manometer
• Built in UV Germicidal light
• Cock for gas, air or vacuum line
• Cold rolled MS sheet body of top chamber duly powder coated, available at extra cost.
• Stainless Steel body of top chamber, duly polished, available at extra cost.

Specifications:

Product Details:

BIO SAFETY CABINET CLASS 2 TYPE B2  (  AARSON -RSE-484) ( for Covid-19)
APPLICATIONS OF BIOSAFETY CABINET :AARSON  BSC : Class II, Type A2 Biological Safety Cabinets offer personnel, product, and environmental protection to obtain optimum control over product quality while reducing the potential for exposure of both product and personnel to airborne biological or particulate chemical agents in low to moderate risk-hazard research and drug preparation or product operations
SALIENT FEATURES & CONSTRUCTION OF AARSON BIOSAFETY CABINET
User Friendly Ergonomic Design.

• Controlled Environment Particulate Free Product Protection.
• Work area surrounded by negative pressure, double wall plenums for protection.
• Aerodynamic designed airflow grille maintains safety by preventing blockage.
• Silent Vibration
• Free Blower ensure noiseless operation.
• Sound level no more than 65 dbA.
• The Unit is suitable for CLASS 100 conditions.
• 70% of the air is re-circulated through the HEPA filter.
• The contaminated air is drawn by the blower through the plenum of the cabinet.
• 30% of the air is exhausted from work area.
• Filtered Exhaust - protects ambient environment, and avoids build up, air borne particles.
• The exhaust of Safety Cabinet is connected to the Virus Burn out Unit for product and personnel protection.
• Air is drawn through Pre-Filter and is made to pass through high effective HEPA (High Efficiency Particular Air) filters.
• The efficiency of HEPA Filter is greater than 99.97% down to 0.3 micron.
• Basic material is thick board wood front back top and exterior surfaces are covered with Formica. OR Cold rolled steel duly powder coated OR Stainless Steel (SS-304) (as ordered).
• Working table is made of Stainless Steel Sheet (SS-304 grade).
• Window opens to 20cm±5mm working height with predefined locking device.
• Built in U.V. Germicidal light
• Facilitates sterilization of working area before and after use. Cock - for gas, air or vacuum, (only 1 no.) is provided.
• Working area is illuminated by fluorescent lighting fitted to the unit.
• The blower and motor assembly is statically and dynamically balanced of 1/5 H.P. capacity operates with minimum noise level.
• Height of the working table provides comfortable "SIT DOWN" working position for the operator.

Additional Information:

• Production Capacity: 10
• Delivery Time: 10-15 days
• Packaging Details: wooden carate

Product Details:

Product Details:

We are offering SS Biosafety Cabinets to our clients.

 

Product Details:

• Floor standing biosafety cabinet Class II with UV lamp providing protection for personnel against biological agents and contamination of sample/product with which they are working; cabinet support stand for 
• Service ports (gas tap, vacuum tap
• Electrical socket, UV socket); stainless steel work surface, sliding sash airtight
• UV-safe safety glass front screen; automatic laminar air flow; alarms for fan failure

Product Details:

We are engaged in offering our clients a wide array of Laboratory Shakers, which are manufactured using optimum grade raw material.

Our range includes:

• Orbital Shaker
• Shaker Water Bath
• V.D.R.L. Rotator
• Digital Flocculator (Jar Test Apparatus)
• Rotary Shaking Machine
• Bench top Reciprocating Shaker
• Hybridization Shaker
• Rocker Platform Shaker
• Tissue Culture Rotator
• Orbital Shaking Incubator
• Vortex Shaker
• Wrist Action Shaker

Water - Stills:

• Water-Still (Manesty Type)
• Water-Still (Barnstead Pattern)

Product Details:

• High capacity
• Horizontally circular 15mm orbit for aeration & mixing
• Supplied with proper platform and mat

Product Details:

Digital Deionizer consists of an inbuilt pre-filter and very high exchanging cap. Noncorrosive Cation & anion resin columns pre-filled with imported Resins for the efficient result having treated water parameters conforming to IS 1069/64.

Product Details:

Product Details:

Product Details:

Being a well established-organization, we are engaged in manufacturing, trading, exporting and supplying a distinguished range of Aarson Vertical Autoclave. Our skilled personnel make use of optimum quality components and advanced technology for manufacturing this equipment. Furthermore, our offered equipment is widely used in various laboratories for sterilizing process. Before final dispatch, our quality experts rigorously check this autoclave on industry defined quality parameters. Our prestigious clients can avail this autoclave from us at affordable price.

 

Features:

• Prevents heat loss

• Provides stable temperature

• Safe & uninterrupted functioning

Autoclaves:

• High Pressure Autoclave
• Autoclave (Front opening) Rectangular
• Autoclave (Regular Model) Vertical
• Autoclave Table Top (Portable)
• Autoclave CGMP Series

Block Heater / Digester:

• COD Digester
• Block heater
• Block Digestion system

Product Details:

We are offering Suction Pump And Filter System to our clients.

 

Product Details:

• Suction Machine 2 Bottle (Electric)
• Suction machine suitable for use in theatre, for both adult and pediatric use
• Constructed from coated non-corrosive, extreme heat resistance material and electrically insulated and mobile on antistatic castors φ 60 mm
• 2No. lockable, with high level push handle
• With 2 X 2 liter polycarbonate autoclavable jars complete with overflow valve
• With foot operated switch
• High flow rate
• Vacuum gauge graduated in mmHg and kPa
• With suction control valve and clearly marked vacuum gauge
• Anti-bacterial filters
• Suction tubing connection, antistatic neoprene.
• Overflow pump protection
• Cable towage on back with reversible cleats
• One year warranty

Accessories to be supplied:

• Bacterial filters 20 No
• Suction tubing, antistatic neoprene 5 Boxes

Product Details:

We are offering Refrigerated Micro Centrifuge to our clients.

 

Product Details:

• Refrigerated, interchangeable rotor (15 mls and 50 ml tubes)
• supply complete with cables and different rotors of 1 pc each: for 24x2.0 ml aerosol tight fixed angle rotor, rotor for 6 x 15/50 ml tubes, aerosol-tight kit rotor for 24 spin columns of 1.5/2.0ml, and a swing bucket rotor for two plates
• Lid Lock and Imbalance detector
• Internal Chamber in stainless steel

Product Details:

We are offering Aarson Horizontal Autoclave to our clients. Our range of laboratory heating equipment is used to supply a controlled amount of heat needed to effect a reaction or process of separation. These equipment are designed to ensure reliable and safe operation in different environments. Our range of laboratory heat equipment is available in different models and designs at the most competitive prices.

Product Details:

Thin Layer Chromatography Apparatus to introduce the principles of absorption chromatography using the thin layer technique. This mechanism is having moveable applicator with inbuilt thickness arrangement between 0 to 2mm (minimum div. 0.25mm) in further consists of the following components.

Features:

• Spreader (applicator) made of electroplated brass.
• Perspex base of 114x23 cm to support glass plates.
• Plate rack alluminium, anodised for ten 20x20cm or 20x10cm plates.4. Developing tank with lid.
• Spotting template made of perspex.
• TLC plates set of five 20x20cm. and two 20x5cm, or set of ten 20x10cm and two 20x5cm
• Glass sprayer with rubber bellow, cap. 100ml8. Micro-pipette
• Subscriber for marking lines made of stainless steel10. 

Instruction manual:

• Same as above but the aluminium applicator Model No. SSI/48A
• Accessories for T.L.C. Apparatus
• Brass Applicator Spare Aluminium Applicator Spare Spotting template made of perspex.
• Plate rack made of anodised aluminium to take ten plates.
• Plate rack made of stainless steel to take plates of 20x20cm vertically for developing. 
• Model No. SSI/53
• Glass plates all sides ground for T.L.C.
• Size 20x20 cm Size 20x10 cm Size 20x5 cm

Chromatography tank with cover for plates of different sizes

• Size 20x5 cm, 20x10 cm, 20x20 cm

Accessories for T.L.C. Apparatus:

• Glass sprayer with rubber bellow.
• Perspex base of 114x23 cm to support glass plates.

 

Optional Accessories for T.L.C. Apparatus:

• Dessicator cabinet: This is used for storing plates of TLC and for general laboratory work. 
• Made of thick sheet, with stout glass door sealed with rubber gasket. 
• A tray for silica gel dessicant and perforated shelf are provided.
• Inner dimensions (height x width x depth) 30x50x35 cm
• T.L.C Master Sheet for direct reading of Rfvalues. Evolved by Dr. S.K. Arora.
• T.L.C plate storage cabinet made of wood with MICA on all sides. For transport and storage of coated plates, sealed against air humidity.

Product Details:

We are one of the leading organization engaged in providing excellent quality Lab Stirrer which are manufactured by using high grade material. These products are manufactured at par with the latest technological advancements.

Our range includes:

• Multi Magnetic Stirrer Bath
• Multi Magnetic Stirrer
• Multi Magnetic Stirrer with Hot Plate
• Digital Motor less Multi Magnetic Stirrer
• Rota Mantle
• Magnetic Stirrer
• Magnetic Stirrer with Hot Plate
• Magnetic Stirrer Bath
• Stirrer (Regular)
• Overhead Mechanical stirrers
• Overhead Electronic stirrers
• Homogenizers
• Dispersers

Product Details:

We are offering Microbiological Incubator to our clients.

 

Product Details:

• Forced Air Convection
• Inner glass doors
• Locking door
• Casters
• Programmable with different temperature ramps on the same program (at least 30 ramps)

Product Details:

We are offering Chest Freezer to our clients.

 

Features:

• Laboratory-type 
• Display with temperature
• Isolation thickness at least 40 mm
• CFC and HCFC free

Product Details:

Fume Hood are recommended for exhaust from the hood working area, of gases, vapor, toxic particles, odor to improve the working environment of people who regularly handle toxic substances. These reduce personal exposures and odor level in the laboratory. These are designed to exhaust toxic, or otherwise harmful vapors etc., for protecting laboratory personnel types of equipment. A motor-blower exhaust system (Optional) generates negative pressure within the hood, extracting the contaminated air from the work area and expelling it into the atmosphere and preventing the fumes from escaping into the room. These are recommended for various laboratories like Bio-Chemistry, Pharmaceutical units, printed circuit etching/cleaning etc. These are capable or handling corrosive fumes of sulphuric and hydrochloric acids etc. If work-area walls are lead-lined (Optional), it can be effectively used for Radio-Isotopic applications.

 

Construction:
The main body of the fumes hood is made of FRP. The work surface (Worktable) is of stainless steel sheet. A small S.S. Sink, water tap and water outlet provided. A sliding door made of acrylic, moves vertically up/down with counter balanced weight operated by steel rope. Hope is provided with fluorescent light for easy working in the chamber. A metal clad socket and gas cock is also provided in the chamber. The control panel is fitted with on/off toggle switches for mains, motor-blower and tube light and mains indicator.

 

Standard Sizes:
• 4’ × 2’ × 2'

• 6’ x 2’ x 2'

• 5’ x 3’ x 2'

Other sizes on request.

 

Optional Accessories:
• Complete exhaust system suitable for 10' duct and installation.
• Fume Duct - PVC.
• Lead-Lining on work-area walls for radioisotope application.
• Special exhaust system (for duct above 10 ft.)
• F.C. mounting base with storage space and door.
• Acid resistance ceramic- tiles work surface (Work Table).

Product Details:

We are offering Laboratory Freezers to our clients.

 

Product Details:

• Designed for storage of frozen biological samples
• Microprocessor controlled
• Maximum Temperature Stability
• Quick freezing program
• High/low Alarm for high temperature

Product Details:

We are offering Benchtop Centrifuge to our clients.

 

Product Details:

• Forced Air Convection
• Inner glass doors
• Locking door
• Casters