Microscope ComponentOur range of products include microscope accessories, tangent galvanometer, automatic tissue processor, post mortem table, auto bench centrifuge and magnetic stirrer.
Approx. Price: Rs 10,000 / PieceGet Latest Price
|Magnification||10X, 20X, 40X, 100X|
|Color||Black, Blue, Grey etc|
Keeping track with the latest market development we are actively engaged in offering supreme quality Microscope Accessories that are widely used in microscope manufacturing industries. The offered accessories are manufactured with the help of the finest quality raw material and technically advanced machines by our skilled professionals. Provided accessories are designed in various specifications and customized options in order to cater to the requirements of the clients.
- Seamless finish
- Robust construction
- Easy to install
- Objectives: Achromatic interchangeable and parfocal.
- Dry type except X 100 which is an oil immersion
- N.A.A X 4 or X 5 0.10
- B X 10 0.25
- C X 20 0.40
- D X 40 or X 45 0.65 Spring loaded
- E X 100 1.3 Spring loaded
Approx. Price: Rs 1,450 / PieceGet Latest Price
|Compass Diameter||4 inch|
We are offering Tangent Galvanometer to our clients.
- Horizontally oriented compass indicator is located in the center of a vertically oriented coil of wire all mounted on a wooden stand with leveling screws.
- The coil taps are marked 2,50 & 500
Automatic Tissue Processor
Approx. Price: Rs 4.85 Lakh / PieceGet Latest Price
Automatic Tissue Processor
|Capacity||100 tissue cassette per Basket|
|Temperature Range||50 - 65 Degree C|
|Number of Notch||1|
is designed to prevent a solution to the rapid processing of tissue in Histology Laboratories. MPTP removes all the water from a tissue sample and replace it with para???n wax with optimum speed to curtail damage to the tissues caused by dehydration and shrinkage.
- Empower to do most potentially hazardorous procedures on just a click.
- System is prudent and well guarded.
- Design is stout and proposes unswerving performance on smallest space.
- Astonishing price versus performance ratio.
- Safety device for Tissue in case wax not melted the basket stop at the station 10th – 11th till the temperature is not attained.
- Trouble free and maintenance free.
- Heavy gauge used in fabrication of body.
- Wax bath stainless steel inner outer with Te???on coated wire used in heater with best quality heating wire with thermal cut out of 75°C.
- External body powder coated to avoid chipping and anti rusting chemical used all moving parts moving on Ball bearing oil sealed.
- Not much maintenance required.
- Main motor used Korean Geared motor to avoid vibration and sound.
- In case of emergency side lifting handle provided to take out Tissue basket in case of Electricity failure.
- The instrument microprocessor controlled with adequate memory to save and retrieve at least 6 user selectable programs.
- Rotary head have a lock out facility at the end of run to prevent basket moving from station 12 to station 1.
- Have 10 stations with organic solvent resistant lipless beakers of 2 litre capacity.
- Have a minimum of two temperature controller wax baths of 2 litre capacity.
- Have individual programmable timing sequence for each station from 1 min to 6 hrs in increments of 1 min and programmable delay start time of up to 99 hrs.
- Retain cycle information in case of power failure to continue processing on restoration of power.
- The basket automatically be lowered into the nearest station in case of power failure during transfer of tissue basket from one station to next.
- In case of power disruption during a cycle, then an error msg indicating the station in which there was power failure and the extra immersion time spend by the basket in the station will be ???ashed.
Approx. Price: Rs 68,500 / PieceGet Latest Price
|Size||2565 x 765 x 865 mm|
|Surface Finish||Color Coated|
We are offering Post Mortem Table to our clients.
- With a sink and level taps
Approx. Price: Rs 58,950 / PieceGet Latest Price
|Max Rcf||3000 x g|
|Rotor Capacity||30 x 15 ml|
|Sleeves Material||Stainless Steel|
We are offering Auto Bench Centrifuge to our clients.
- Non-refrigerated, with a fixed angle rotor, with steel sleeves/adapters/ cushions for falcon tubes, max. rcf 3000 x g
- Complete with user manual, emergency unlock function on the power outage, protective cover
Approx. Price: Rs 1,950 / PieceGet Latest Price
|Capacity||4 x 2.8 Liter Flasks|
|Platform Length||39 cm|
|Platform Width||40 cm|
|Platform Height||8 cm|
|Min Stirring Speed||160 rpm|
|Max Stirring Speed||1150 rpm|
We are offering Magnetic Stirrer to our clients.
- Digital display
- Possibility to add a remote controller to use the Stirrer inside an incubator without opening the door (optional)
Approx. Price: Rs 21,500 / PieceGet Latest Price
|Length Range||300 - 900 mm|
|Width Range||300 - 600 mm|
|Height Range||300 - 600 mm|
|Min Capacity||28 L|
|Max Capacity||336 L|
(Elements on three sides) has Thermostatic control with a sensitivity of + 0.5oC. Heating elements are placed in ribs at the bottom and sides. Double walled inside Anodized aluminum or Stainless Steel. Outside mild steel painted in epoxy powder coating. The door has a synthetic rubber gasket. Built-in Horizontal L shape thermometer with adjustable selves. Size Appx. Cap. Shelves:
- 300x300x300mm (12”x12”x12”) 28 ltr. 2 6700.00 10400.00
- 350x350x350mm (14”x14”x14”) 45 ltr. 2 8000.00 12800.00
- 400x400x400mm (16”x16”x16”) 65 ltr. 2 11000.00 15500.00
- 450x450x450mm (18”x18”x18”) 95 ltr. 2 13000.00 16500.00
- 600x450x450mm (24”x18”x18”) 125 ltr. 2 16000.00 23500.00
- 600x600x600mm (24”x24”x24”) 224 ltr. 2 18000.00 25000.00
- 900x600x450mm (36”x24”x18”) 252 ltr. 2 30500.00 35000.00
- 900x600x600mm (36”x24”x24”) 336 ltr. 2 32000.00 48500.00
- Imported Thermostat “EGO/ JUMO German with the accuracy +1 degree 2700.00
- Digital Temp. Indicator cum Controller 7000.00
- Microprocessor Based PID digital temp. Indicator cum controller 14000.00